Edge electrospinning

  • Scaling upthe production rate of nanofibers by understanding the fundamental physics:
    Development of novel fabrication methods which enable increased throughput while still generating high-quality nanofibrous materials (i.e. sub-micron fiber diameters with a narrow fiber distribution) represents a critical goal for facilitating broader industrial utilization of these polymeric materials. A host of applications ranging from tissue scaffolding for biomedical applications, as sensors, in air and water filtration systems, or acting as "smart" fabrics would benefit from such capability.

    • Towards this end, we have demonstrated solution-phase electrospinning from an unconfined fluid near a plate edge will produce small diameter fibers with a narrow size distribution, and has remarkable similarity to traditional single-needle electrospinning while also possessing clear advantages for increased mass throughput.

    • This concept has been extended by electrospinning from a stationary, thin-lipped fluid-containing bowl. Our paper detailing this experiment has been downloaded >2434 times according to the journal website metrics (link) [as of 12/27/19]

    • Further, by utilizing highly-conductive polymer solutions (through the introduction of a high concentration of salt), electrospinning can actually be achieved from narrow jets essentially without a linear region and a vastly increased whipping region, enabling continuous fiber production from radially-pointing jets, with each having an extremely high feed rate -- the combined consequence is of an overall tremendously enhanced nanofiber production rate.

    • Notably, the edge electrospinning approach is a general enough method that with minor experimental modification, polymer melts can be readily electrospun using an unconfined configuration, creating a scaled up, solvent-free fabrication system, allowing truly environmentally "green" processing of commercial thermoplastics to create mesoscale fibers.

    • Further research is being pursued to extend such a melt electrospinning approach to produce nanofibers of commerically-relevant thermoplastics.

    • Q.-Q. Wang, C. K. Curtis, N. M. Thoppey, J. R. Bochinski, R. E. Gorga, and L. I. Clarke, "Unconfined, melt edge electrospinning from multiple, spontaneous, self-organized polymer jets," Materials Research Express 1, 045304 (2014). (journal) [paper]

    • N. M. Thoppey, R. E. Gorga, L. I. Clarke, and J. R. Bochinsk, "Control of the electric field - polymer solution interaction by utilizing ultra-conductive fluids," Polymer 55, 6390 (2014). (journal) [paper]

    • M. P. Roman, N. M. Thoppey, R. E. Gorga, J. R. Bochinski, and L. I. Clarke, "Maximizing spontaneous jet density and nanofiber quality in unconfined electrospinning: the role of inter-jet interactions," Macromolecules 46, 7352 (2013). (journal) [paper]

    • N. M. Thoppey, R. E. Gorga, J. R. Bochinski, and L. I. Clarke, "The effect of solution parameters on spontaneous jet formation and throughput in edge electrospinning from a fluid-filled bowl," Macromolecules 45, 6527 (2012). (journal) [paper]

    • N. M. Thoppey, J. R. Bochinski, L. I. Clarke, and R. E. Gorga, "Edge electrospinning for high throughput production of quality nanofibers," Nanotechnology 22, 345301 (2011). (journal) [paper]

    • Muthuraman Thoppey, J. R. Bochinski, L. I. Clarke, and R. E. Gorga, "Unconfined fluid electrospun into high quality nanofibers from a plate edge," Polymer 51, 4928 (2010). (journal) [paper]

    Click for news stories about the unconfined electrospinning technique:
    Above: Mary Scott and the ultra high vacuum chamber.